Pee Morgan - How to play bass guitar

How to play the piano bass guitar BASS GUITER PARTS

Bass guitar parts 

(1)

(MACHINE HEAD) - The machine head is located at the top of the guitar and is where the strings are tensioned by the (BAss-KEY) string tensioner and (PULLEY) string tensioner.

(2)

(BAss KEYS) - has 6 (KEY) for stringing (4) strings and is much larger than (KEY) of (LEAD GUITAR). These (KEY) are adjusted by (UP DOWN) and (DOWN) force.

(3)

(PULLEY) The pulley is a small piece of machinery.

There are 1 rope and (2) ropes, and the work of holding 1 rope is done.

(4)

(NUT) - Holds the 4 strings together in a fixed position.

(5)

(FRET) - Small copper bars, called frets, are used to play on the fretboard.

The main point of FRET is that the sound changes from one note to another as you play from one fret to the next. The sound changes because of the FRET.

(6)

(POSITION) - Markers, fingering marks, are markers for guitarists to distinguish chords, melodies, and notes.

(7)

(BASS GUITER). sicacforczrobiertone ap (RHYTHM) & (LEAD) Unlike the guitars, the fretboard is wider.

(8)

(BASS) guitar strings, unlike any other guitar strings, are made of special steel (STEEL) and are wrapped around the strings so that they do not hurt your fingers when you play. Another type is called (PLASTIC COATED) which is wrapped around a plastic sheet and is black in color.

(9)

(STRAP PIN) - means to attach a (STRAP) string to the front and back of the (GUITER) to make it easier to tie.

(10)

The PLASTIC PLATE is provided for the installation of the PICK UP-VOLUME CONTROL and (JACK SOCKET). The (PLASTIC) plate is held in place with small screws.

(11)

(SOLID BODY) Made of solid wood and finished with paint or polish.

(12)

(BRIDGE METAL COVER) has a metal plate wire grill and

It is a sheet of iron covering 4 wires.

- (13)

If the (PICK UP SELECTOR) button is set to ON, the front (Pick Up) will sound alone, and the second (ON) button will sound both the rear and front (Pick Up) together. The last (off) button is the instrument button that is turned off.

(14)

(LOW FREQUENCY PICK UP) is a small steel box that creates an electrical sound line by repeatedly winding a magnetic bar (coil) to prioritize low-frequency sounds.

(15)

(VOLUME CONTROL) This is a small sound control device for adjusting the volume, pitch, and volume of the sound.

(3G) (JACK SOCKET) is for connecting to (JACK PIN) wire.

How to play the piano bass guitar

How to play the piano bass guitar BASS GUITER PARTS

Bass guitar parts 

(1)

(MACHINE HEAD) - The machine head is located at the top of the guitar and is where the strings are tensioned by the (BAss-KEY) string tensioner and (PULLEY) string tensioner.

(2)

(BAss KEYS) - has 6 (KEY) for stringing (4) strings and is much larger than (KEY) of (LEAD GUITAR). These (KEY) are adjusted by (UP DOWN) and (DOWN) force.

(3)

(PULLEY) The pulley is a small piece of machinery.

There are 1 rope and (2) ropes, and the work of holding 1 rope is done.

(4)

(NUT) - Holds the 4 strings together in a fixed position.

(5)

(FRET) - Small copper bars, called frets, are used to play on the fretboard.

The main point of FRET is that the sound changes from one note to another as you play from one fret to the next. The sound changes because of the FRET.

(6)

(POSITION) - Markers, fingering marks, are markers for guitarists to distinguish chords, melodies, and notes.

(7)

(BASS GUITER). sicacforczrobiertone ap (RHYTHM) & (LEAD) Unlike the guitars, the fretboard is wider.

(8)

(BASS) guitar strings, unlike any other guitar strings, are made of special steel (STEEL) and are wrapped around the strings so that they do not hurt your fingers when you play. Another type is called (PLASTIC COATED) which is wrapped around a plastic sheet and is black in color.

(9)

(STRAP PIN) - means to attach a (STRAP) string to the front and back of the (GUITER) to make it easier to tie.

(10)

The PLASTIC PLATE is provided for the installation of the PICK UP-VOLUME CONTROL and (JACK SOCKET). The (PLASTIC) plate is held in place with small screws.

(11)

(SOLID BODY) Made of solid wood and finished with paint or polish.

(12)

(BRIDGE METAL COVER) has a metal plate wire grill and

It is a sheet of iron covering 4 wires.

(13)

If the (PICK UP SELECTOR) button is set to ON, the front (Pick Up) will sound alone, and the second (ON) button will sound both the rear and front (Pick Up) together. The last (off) button is the instrument button that is turned off.

(14)

(LOW FREQUENCY PICK UP) is a small steel box that creates an electrical sound line by repeatedly winding a magnetic bar (coil) to prioritize low-frequency sounds.

(15)

(VOLUME CONTROL) This is a small sound control device for adjusting the volume, pitch, and volume of the sound.

(3G) (JACK SOCKET) is for connecting to (JACK PIN) wire.

How to play the piano bass guitar